Art. 141337LBO security door lacquered in RAL 6005

Art. 141 · Armored vehicles

You choose the design. Even the one that is not in the catalogue.

Art. 141 security structure in Class 3 or Class 4. On top goes the design you want: fifteen engravings from the Linea IPL, thirteen from the Wood range, the collection designs, or your own.

Request a custom quote →See prices and buy online

Opens porteitaliane.com, our online shop.

3 and 4burglar resistance classes
28catalogue designs
14wood-effect finishes
RALany lacquer color

The problem

Safety is not up for discussion. Appearance is, and no one is saying it

The front door is the only one that is looked at from the outside and the inside. Almost all security doors solve the issue of security and give up the rest: a smooth panel, three colors from the catalog, and a thickness that immediately reveals what lies beneath.

The burglar-resistant structure Art. 141 never changes. The panel that goes over it changes — and the choice there is free.

Standard security door

Security solved, aesthetics suffered. The panel that is there, in the color that is there.

FIP Art. 141 security door

Same structure, and on top of it the design and finish you chose for the rest of the house.

Security is non-negotiable. Looks are, and nobody says so
Art. 141LLBO, smooth white laminate
Construction
Art. 141 lacquered in RAL 7036

What is it made of

The fifteen parts that make a security door

These are the ones listed in data sheet, Item 141. Safety doesn't lie in the panel—it lies in the frame, the switches, and the upright—that is, in the parts that no one sees.

1 · False frame20/10 galvanized sheet steel, to be set in the wall, supplied with installation spacers
2 · Frame fixedTear-resistant, dark brown pre-coated sheet steel, 8 Allen screws for adjustment
3 · LeafGalvanized sheet steel, prepared inside and out for any type of cladding
4 · HingesAdjustable, single inseparable profile, stainless steel pin and ball
5 · Reinforcing OmegaClass 3: one vertical and four horizontal · Class 4: two vertical
6 · Diverter ValvesClass 3: double-piston double-way valve · Class 4: triple-piston valve
7 · LockVery high security European cylinder with anti-tamper defender
8 · HandlesFixed knob and handle in bronzed aluminum
9 · GasketPerimeter rebate gasket: draft-proof, dust-proof and noise-reducing
10 · Peephole180° Wide-Angle
11 · ThresholdAutomatic drop seal against drafts, aluminum and rubber
12 · Safety hookA limiter that allows the leaf to open partially
13 · PanelsCladding panels, smooth, 7 mm thick
14 · Additional sheet metalGalvanized, integrated with leaf — optional
15 · Safety postLock Protection — Class 4

Six styles, one structure

The same front door, six different houses

Six catalogue configurations. The Art. 141 structure below is identical in all six: what changes is the panel design and the upholstery material.

Aluminum RAL 9010
Aluminum RAL 9010Art. 141362LBO+RARB, with stainless steel band — handle 143M70
Wenge wood
Wenge woodArt. 141339W, diagonal pattern — handle 143M
Slatted Tanganyika walnut
Slatted Tanganyika walnutArt. 141340NTN, vertical slats — 143M handle
Aluminum National walnut
Aluminum National walnutArt. 141332NTT+RALB, design 332 — handle 143M
Tanganyika walnut laminate
Tanganyika walnut laminateArt. 141NTN, leaf smooth — handle 143M
National walnut laminate
National walnut laminateArt. 141LNN, leaf smooth — handle 143M

Beneath the panel

Class 3 or Class 4: the difference, line by line

Not a single comma changes in what you see. Four things change, and it is the exposure level of the home that decides which of the two is needed: Class 3 for apartments and houses in inhabited areas, and Class 4 for isolated villas and more exposed entrances.

Class 3Class 4
Locking divertersDouble diverter with double boltDouble diverter with triple bolt
Reinforcements for leafOne vertical omega and four horizontalTwo vertical omegas
Security upright—Fitted, protecting the lock
Frame adjustmentVerticalHorizontal and vertical
Subframe20/10 galvanized sheet steel with spacers20/10 galvanized sheet steel with spacers
LockEuropean cylinder with defenderEuropean cylinder with defender
Peephole180° wide-angle180° wide-angle
ThresholdAutomatic drop seal in aluminum and rubberAutomatic drop seal in aluminum and rubber
Standard sizes, single leafW 80/85/90 × H 210 clear openingW 80/85/90 × H 210 clear opening

The highlighted lines are the differences between the two classes. Everything else is identical.

Class 3 data sheet
Class 3 data sheet
Class 4 data sheet
Class 4 data sheet

Customise

Fifteen ready-made designs. And then all the others

The leaf is designed both inside and out to accommodate any type of finish: that’s why, on a FIP armored vehicle, there’s a real choice in terms of aesthetics. This is the IPL Line, the library of pantograph patterns designed specifically for armored vehicles.

Linea IPL design Art. 313
Article 313IPL line
Linea IPL design Art. 330
Art. 330IPL line
Linea IPL design Art. 331
Article 331IPL line
Linea IPL design Art. 332
Art. 332IPL line
Linea IPL design Art. 333
Article 333IPL line
Linea IPL design Art. 334
Article 334IPL line
Linea IPL design Art. 335
Art. 335IPL line
Linea IPL design Art. 336
Article 336IPL line
Linea IPL design Art. 337
Article 337IPL line
Linea IPL design Art. 338
Article 338IPL line
Linea IPL design Art. 341
Article 341IPL line
Linea IPL design Art. 342
Article 342IPL line
Linea IPL design Art. 343
Art. 343IPL line
Linea IPL design Art. 344
Article 344IPL line
Linea IPL design Art. 345
Article 345IPL line
And then all the others

The interior door designs, on the entrance door

The thirteen designs of the Wood range — 2 Riquadri, 4 Riquadri, Cornes, Geometrica, Horizontal, Linee, Lines, Modern, Mondrian, Plissè, Rettangoli, Stripes, Vertical — and the designs of the five Porte dal Mondo collections are added to the IPL Line. And if the design you have in mind is in neither of the two catalogues, it can be customized: upon request, the door can be made with any design of your choice.

Wood effect

Fourteen laminate finishes

These are the same finishes as the laminate interior doors: the entrance and the doors of the house can have the exact same wood.

Security front door, White laminate finish
White laminate
Security front door, Matrix white finish
Matrix white
Security front door, Cherry finish
Cherry
Security front door, Larch finish
Larch
Security front door, National walnut finish
National walnut
Security front door, Horizontal walnut finish
Horizontal walnut
Security front door, Natural Tanganyika walnut finish
Natural Tanganyika walnut
Security front door, Gray elm finish
Gray elm
Security front door, Taupe rosewood finish
Taupe rosewood
Security front door, White rosewood finish
White rosewood
Security front door, Gray oak finish
Gray oak
Security front door, Horizontal oak finish
Horizontal oak
Security front door, Tranchè finish
Tranche
Security front door, Slatted stained walnut finish
Slatted stained walnut
Lacquered

Any RAL color

If the project calls for a color instead of a wood, the front door is lacquered in the RAL shade you choose. These are just a few examples.

RAL 9010
RAL 7036
RAL 6005
RAL 9005
RAL 3005
RAL 5011
RAL 8001
RAL 7032

On-screen colors are approximate: choose the shade from the RAL color chart.

Sizes and installation

Standard sizes, and non-standard sizes

Three clear lights, a height, and custom production for everything else.

Measure the wall openingSpace is needed for the frame: maximum dimensions L 93/98/103 × H 217 cm.
Check the clear openingThe one that remains is W 80/85/90 × H 210 cm. If that's not enough, we go custom-made.
Choose the design and finishLinea IPL, Wood range, collections or custom design; wood-effect laminate or RAL lacquer.
Install the subframe20/10 galvanized sheet steel with spacers, set in the wall before the finishes.
Fit and adjustEight Allen screws on the frame and hinges that can be adjusted in all directions: the alignment is calibrated on site.
Size diagram
Standard single-leaf sizes. Outside these sizes, the door is made to the surveyed opening.
Standard clear openingW 80 · 85 · 90 × H 210 cm
Maximum overall frame sizeW 93 · 98 · 103 × H 217 cm
Non-standard sizeAvailable
Catalogue designs15 IPL lines + 13 wood range, plus the collection drawings
Custom designsOn request, any design you choose
OriginMade entirely in Italy

Two ways to go

Made to measure, or ready to go

The made-to-measure project

Beyond the three standard lights, with the design of your choice — even one not in the catalogue. The complete Class 3 and Class 4 technical data sheets can be downloaded from the download area.

Data sheetsCatalogs

Standard sizes, online

The three standard openings are ready and can be bought right away from our online store, Porte Italiane, with the catalog finishes.

Go to Porte Italiane →

Questions

The ones we really get on the phone

What is the difference between Class 3 and Class 4?
Four things. The diverters go from double to triple bolt. The leaf reinforcement pattern changes: one vertical omega plus four horizontal omegas in Class 3, two vertical omegas in Class 4. Class 4 adds a security upright protecting the lock. And the frame on Class 4 is also adjustable horizontally. Everything else—the lock, peephole, threshold, and dummy frame—is identical.
What are the standard sizes?
Clear passage width L 80, 85, or 90 × H 210 cm, with maximum overall dimensions for frame of L 93, 98, or 103 × H 217 cm, for a leaf. For dimensions outside these ranges, the product is manufactured based on the measured opening dimensions.
Can I have the same design as my interior doors?
Yes, and that’s why a FIP armored door makes sense within a FIP project. In addition to the fifteen designs from the IPL Line, you can choose from the thirteen in the Legno range and the designs from the five “Porte dal Mondo” collections. And upon request, the door can be customized with any design of your choice: if you have your own, just send it to us.
Can I have the same finish as my interior doors?
Yes. The fourteen wood-effect finishes of the door are the same as the laminate of the interior doors, so the entrance and the interior doors of the house can have the exact same wood. Alternatively, the door can be lacquered in any RAL color.
How do I get a quote?
We need the dimensions of the opening wall unit, the floor it’s located on, and the layout of your home: based on that, we can determine whether it fits one of the three standard sizes or if a custom size is needed, and which class makes sense. If you already have a design in mind—even one not in the catalogue—please send it to us. The standard sizes are also listed in our store’s price list. Italian Doors.

Let's talk

Send us the measurements and the design you have in mind

In your message, give us the width, height and thickness of the wall, the floor it is on, and, if you have it, the design you have in mind. With this information, we can tell you whether you fall into one of the three standard sizes or if a custom size is needed, which class makes sense, and how much it costs. If the design is not among those in the catalogue, you can attach a photo of it below.